Tolet Two-Piece Toilet Rough-In Adjustable

The Tolet Two-Piece Toilet Rough-In Adjustable solves one of the most common toilet replacement complications – the non-standard rough-in distance – by accommodating three standard rough-in dimensions of 10 inches 12 inches and 14 inches from the finished wall to the center of the drain flange without requiring adapter flanges spacers or non-standard wax rings that introduce additional failure points and installation complexity. The adjustable rough-in is achieved through a rear outlet design that accepts a flexible drain connector allowing the toilet drain outlet to align with drain flange locations that vary by up to two inches on either side of the standard 12-inch rough-in dimension. This adjustability makes the Tolet Rough-In Adjustable the appropriate replacement choice for older home bathrooms built before 12-inch rough-in became the universal standard or for bathrooms where the original toilet’s rough-in dimension is unknown prior to fixture removal. The elongated bowl provides full adult seating comfort at the comfort height of 16.5 inches from floor to seat surface. The 1.28 gallon dual-flush mechanism offers 0.8 GPF for liquid waste and 1.28 GPF for solid waste reducing average household water consumption compared to single-volume flush toilets. The tank interior uses a standard fill valve flush valve and flapper configuration with replacement parts available at any hardware store. The vitreous china finish is white and the chrome flush lever is replaceable. The toilet ships with a universal wax ring a flexible supply line and bolt caps sized for all three supported rough-in dimensions.