Tolet Tankless Wall-Mounted Toilet

The Tolet Tankless Wall-Mounted Toilet connects directly to the building water supply line without a gravity tank relying instead on the building water pressure to deliver the flush volume at the flow rate required for complete bowl evacuation – an approach that eliminates the tank footprint entirely and reduces the fixture’s visual presence to the bowl and flush valve cover plate only. The pressure-direct flush valve delivers 1.28 gallons per cycle at a controlled flow rate that optimizes bowl hydraulics for complete waste clearance and rim washing without the noise associated with the full pressure release of commercial flushometer systems. The wall-mounting carrier frame is constructed from heavy-gauge galvanized steel and supports loads up to 880 pounds independent of the wall structure behind it – a load rating that exceeds all reasonable use requirements and building code requirements for sanitary fixture structural support. The carrier frame installation is concealed within the wall cavity with only the bowl and flush valve actuator plate visible in the finished bathroom creating the appearance of a bowl floating in front of the wall with no visible supply connections tank or floor penetrations. The flush actuator plate is available in chrome brushed nickel and matte black finishes to coordinate with bathroom hardware selections. The bowl height is adjustable during installation from 15 to 19 inches above the finished floor. The toilet requires a minimum supply pressure of 35 PSI and a maximum supply pressure of 125 PSI – pressure range specifications that are met by virtually all municipal water supplies in North America. A pressure-reducing valve is included for installations with supply pressures above 80 PSI.